fbpx

My Account

My Basket 

My Basket

Outside Mount

WIDTH MEASUREMENT – 

  1. Measure the width of the outside frame.
  2. Add a recommended minimum of 1” – 2” on both sides of the measured frame width to help reduce light seepage around the frame.  This will calculate your total required blind width.

LENGTH MEASUREMENT – 

  1. Measure the length of the outside frame.  
  2. Add 1” – 2” length to the bottom of the frame to help reduce light seepage around the frame.
  3. If you are mounting the Roman Blind just above the outside frame, it is recommended that you add a minimum of 2” to your final measurement.
  4. If you do not wish to block the view through the window when the blind is up (and you have the ceiling height), it is recommended that you install the Roman Blind at least 8” – 12” above the window frame.  Don’t forget to add this additional measurement to the total length of your finished Blind length.
KI OtsdMnt Guide
KI InsdMnt Guide

Inside Mount

IMPORTANT NOTE: In order to install an inside mount Roman Blind, the depth of the inside window casing should be a minimum of 2.5″ or it may protrude out too far. 

WIDTH MEASUREMENT – 

  • Measure the widths at the Top, Middle and Bottom of the inside frame that you want the Blind to cover.

NOTE: The finished width of the Roman Blind will be made 1/4” smaller than the actual frame measurement you provide, to allow for ease of opening and closing the Blind.  If you do not require the width to be adjusted, please annotate this in the ‘additional information’ box.

LENGTH MEASUREMENT – 

  • Measure the required length at the left, middle and right side of the inside frame.  

NOTE: The finished length of the Roman Blind will be made to the shortest length provided.  If you do not want the final length to be adjusted, please annotate this in the ‘additional information’ box.